Skip to main content

Yield to Maturity (YTM) Explained: Formula, Example & How It Differs From the Coupon


Ask a new bond investor which of two bonds is better, and most will point to the one with the higher coupon. It feels like common sense. A 10% coupon pays more than a 7.5% coupon, so it must be the better deal.

Not quite. The coupon only tells you how much interest the bond pays on its face value. It says nothing about the price you pay to buy it today, and that price can be well above or below face value. What you actually earn depends on all of it together: the price, the coupons, the amount you get back at maturity, and how many years you wait for it.

Yield to Maturity, or YTM, pulls all of these into one number. In this article we will look at what YTM means, how it is calculated, a worked example you can check yourself, and why it gives you a fuller picture of a bond's return than the coupon rate.

What Is Yield to Maturity (YTM)?

YTM is the annual return you may expect (not guaranteed) if you buy a bond at today's market price and hold it until it matures, with the issuer paying every coupon and the principal on time. This is an estimate based on assumptions, not a guaranteed return.

This is not just a textbook definition. The Reserve Bank of India describes YTM as the expected rate of return on a bond held until maturity, and FINRA, the US investor-protection body, defines it in almost the same words. In its FAQ on government securities, the RBI goes a step further and tells investors that when choosing a bond, they should look at its YTM. A joint advisory issued by BSE and NSE on online bond platforms also explains YTM as the total annualised return if a bond is held to maturity, based on its current price, its coupons and the time left until it matures.

Technically, YTM is the discount rate at which the present value of all the bond's future cash flows equals its current market price. If you have come across the internal rate of return (IRR), it is the same idea. The RBI explains G-sec yields in exactly this way.

So a bond's YTM is made up of three things: the coupons you receive, any gain or loss between the price you paid and the face value you get back, and the assumption that each coupon is reinvested at the same rate until maturity. That last point matters, and we will come back to it.

The YTM Formula

YTM is the value of r that makes this equation true:

Bond Price = C/(1+r)¹ + C/(1+r)² + … + C/(1+r)ⁿ + F/(1+r)ⁿ

Here, C is the coupon paid each period, F is the face value repaid at maturity, n is the number of periods left, and r is the yield per period.

The catch is that you cannot rearrange this equation to get r on its own. The RBI notes that YTM has to be found by trial and error. You pick a rate and work out the present value of the cash flows. If the answer is higher than the bond's price, you try a higher rate; if it is lower, you try a lower one. You keep narrowing it down until the two match. Nobody does this by hand anymore, but it helps to know what the calculator is doing.

A Quick Shortcut

If you just want a rough figure, there is a well-known approximation:

Approximate YTM = [C + (F − P) ÷ n] ÷ [(F + P) ÷ 2]

P is the current price and n is the number of years to maturity. The top half is your average yearly income, meaning the coupon plus the yearly share of any gain or loss at maturity. The bottom half is roughly the average amount you have invested. It will get you close to the real YTM, though not exactly there.

When Coupons Are Paid Twice a Year

Many Indian bonds, including dated government securities, pay interest every six months. In that case you halve the coupon, double the number of periods, and discount each cash flow at r/2. The RBI's own example does exactly this for a two-year, 8% bond: four half-yearly coupons of ₹4 and the final ₹100 of principal are discounted at r/2 and set equal to the price. The annual YTM is then quoted as twice the half-yearly rate.

Using Excel

Excel has two functions that do trial and error for you. RATE(nper, pmt, pv, [fv]) works well for simple cases. Microsoft's documentation notes that RATE is calculated by iteration, which is the same guess-and-adjust process described above. For a bond, nper is the number of coupon periods, pmt is the coupon, pv is the price entered as a negative number, and fv is the face value.

For real bonds with actual dates, YIELD(settlement, maturity, rate, pr, redemption, frequency, [basis]) is the better choice. Price and redemption are entered per ₹100 of face value, and frequency is 1, 2 or 4 depending on whether coupons are paid yearly, half-yearly or quarterly. In the RBI's worked example for Indian G-secs, frequency is set to 2 and basis to 4, which is the 30/360 day count.

YTM Calculation: A Step-by-Step Example

Bond DetailValue
Face value₹1,000
Coupon rate8% (paid annually)
Annual coupon₹80
Current market price₹950
Years to maturity5

Let's take a simple, hypothetical bond and work it through. (For illustration only: this is a hypothetical bond, not an offering on BondScanner and not a recommendation.)

Step 1: A rough estimate

You pay ₹950 and get ₹1,000 back in five years, so the ₹50 gain works out to ₹10 a year. Add that to the ₹80 coupon and your average yearly income is ₹90. Your average investment over the period is (₹1,000 + ₹950) ÷ 2, or ₹975. Divide ₹90 by ₹975 and you get about 9.23%.

Step 2: The exact figure

Typing =RATE(5, 80, -950, 1000) into Excel gives about 9.30%. You can check it: if you discount the five coupons of ₹80 and the ₹1,000 principal at 9.30%, they add up to ₹950, which is exactly what you paid.

Step 3: What it tells you

The bond's coupon is 8%, but you would earn about 9.30% a year by holding it to maturity. The extra 1.3 percentage points come entirely from buying it below face value.

For comparison, the bond's current yield is ₹80 ÷ ₹950, or 8.42%. That is higher than the coupon but still lower than the YTM, because current yield ignores the ₹50 you pick up at maturity.

Now turn it around. If the same bond were priced at ₹1,050, its YTM would drop to about 6.79%. You still get ₹80 a year, but you lose ₹50 at the end because you only get ₹1,000 back.

Purchase PriceCoupon RateYTMBond Trades At
₹9508%~9.30%Discount
₹1,0008%8.00%Par
₹1,0508%~6.79%Premium

A Second Example: Half-Yearly Coupons

Since a lot of Indian bonds pay interest twice a year, it is worth running one of those too. Take a hypothetical bond with a face value of ₹1,000, a 9% coupon paid half-yearly and four years left to maturity, trading at ₹970.

Each half-year you receive ₹45, which is half of the ₹90 annual coupon, and there are eight payments left. Plugging this into Excel as =RATE(8, 45, -970, 1000) gives a half-yearly rate of about 4.96%. Following the RBI's convention, you double that to quote the YTM, which comes to about 9.93% a year.

Once again, the YTM is higher than the 9% coupon because the bond costs less than its face value. The ₹30 you gain at maturity is spread over the four years and adds to your return.

YTM vs Coupon Rate: What's the Difference?

People often treat these two numbers as if they were the same thing. They are not.

The coupon is fixed on the day the bond is issued. YTM moves every day the bond's price moves. The RBI sums up how the two relate in three simple rules. If a bond trades below face value, its YTM is higher than its coupon. If it trades above face value, its YTM is lower than its coupon. And if it trades at exactly face value, the two are the same. That is exactly what the table in the example above shows.

BasisCoupon RateYield to Maturity
What it measuresAnnual interest as a % of face valueTotal annual return based on the price you pay
Fixed or variableFixed when the bond is issuedChanges with the bond's market price
Considers purchase priceNoYes
Considers capital gain or lossNoYes
Considers time to maturityNoYes
Best used forKnowing your cash interestComparing returns across bonds

Why YTM Matters More Than Coupon

BondCouponPriceYTM
Bond A10%₹1,080~6.95%
Bond B7.5%₹960~9.08%

Here is a comparison that shows the point clearly. Two hypothetical bonds both mature in three years and have a face value of ₹1,000.

Going by the coupon, Bond A is the obvious winner. But you pay ₹80 over face value for it, and you lose that ₹80 when the bond matures. Bond B costs ₹40 less than face value, so you gain ₹40 at maturity. Once the price is taken into account, Bond B earns roughly 2.1 percentage points more per year.

This happens all the time in the secondary market, where bonds rarely trade at exactly face value. If you only look at the coupon, you can end up overpaying for a bond that looks generous or overlooking one that is actually good value.

YTM also lets you compare bonds with different coupons, prices and maturities on one common scale, which is something the coupon cannot do. NISM makes this point too, noting that because YTM accounts for face value, price, coupons and time to maturity, it can be used to compare bonds that look quite different on the surface. It also gives you a sensible number to put next to a fixed deposit rate or another bond of similar quality. The comparison should account for differences in credit risk, liquidity and taxation.

One word of caution, though. A higher YTM is not free money. The SEC's investor education site, Investor.gov, explains that bonds with lower credit ratings carry higher credit risk and offer higher interest rates in return for that risk. So if one bond's YTM is well above that of similar bonds, it is worth asking why before you buy it.

How Bond Prices and YTM Move Together

Bond prices and yields move in opposite directions. When the price goes up, the YTM goes down, and when the price falls, the YTM rises. The RBI, FINRA, NISM and the BSE and NSE advisory all state this, and it falls straight out of the formula: a bond's price is the present value of its future cash flows, so a higher discount rate means a lower price.

In practice, the trigger is usually a change in market interest rates. Investor.gov puts it simply: when rates rise, newly issued bonds pay more, so an older bond with a lower rate may have to be sold at a discount. Its price falls until its YTM is in line with what the market now expects. When rates fall, the opposite happens, and older bonds with higher coupons become more valuable.

How much a bond's price moves depends a lot on how long it has left to run. According to the SEC's investor bulletin on interest rate risk, bonds with longer maturities generally carry more interest rate risk than similar bonds with shorter maturities. NISM points to duration, modified duration and convexity as the measures used to gauge this sensitivity.

Duration: How Much Will the Price Move?

Duration turns this idea into a number you can use. FINRA describes it as a measure of how much a bond's value is likely to change when interest rates move, and offers a handy rule of thumb: for every one percentage point change in rates, a bond's price moves in the opposite direction by roughly its duration, in percentage terms.

So if a bond has a duration of 4 and market rates rise by one percentage point, you would expect its price to fall by about 4%. If rates fall by the same amount, the price would rise by about 4%. A bond with a duration of 10 would move by around 10% in either direction. This is only an approximation, but it gives you a quick feel for how much price risk you are taking on, which YTM alone does not tell you.

This matters most if there is a chance you will sell before maturity. If you hold to the end, day-to-day price swings make little difference to what you receive. If you might need to sell early, a bond with a high duration can leave you with a return quite different from the YTM you started with.

YTM for Zero-Coupon Bonds

Not every bond pays a coupon. Investor.gov describes zero-coupon bonds as bonds that pay no interest during their life. Instead, investors buy them at a deep discount to their face value and receive the full face value at maturity.

Since there are no coupons, the whole return comes from the gap between what you pay and what you get back. That makes the YTM calculation much simpler, because the formula has only one cash flow:

YTM = (Face Value ÷ Price)^(1 ÷ n) − 1

Here n is the number of years to maturity. Say a hypothetical zero-coupon bond with a face value of ₹1,000 matures in three years and is priced at ₹800. Its YTM is (1,000 ÷ 800)^(1/3) − 1, which comes to about 7.72% a year.

This example also shows why the coupon rate is not enough on its own for comparing bonds. A zero-coupon bond has a coupon of 0%, but it can still give you a perfectly reasonable return. Only YTM puts it on the same footing as a bond that pays regular interest.

Clean Price, Dirty Price and Accrued Interest

When you buy a bond between two coupon dates, the price you see quoted is usually not the full amount you pay. The RBI's FAQ on government securities explains why.

The seller has held the bond since the last coupon date, so they are entitled to the interest earned over that period. This is called accrued interest, and the buyer pays it to the seller on top of the agreed price. The quoted price, without accrued interest, is known as the clean price. The clean price plus accrued interest is called the dirty price, and that is the amount that actually changes hands.

The RBI gives a worked example. For the 8.83% 2023 G-sec, the last coupon was paid on 25 November 2013, and a trade settled on 30 January 2014. Using the bond market's 30/360 day count, that is 65 days of interest. Accrued interest comes to 8.83 × 65/360, or about ₹1.59 per ₹100 of face value. With a clean price of ₹100.50, the dirty price works out to about ₹102.09.

Why does this matter for YTM?

Because when you compare the YTM shown on a platform with what you will actually pay, you should not be surprised to see accrued interest added at checkout. It does not mean you are paying more for the bond; you get that interest back when the next full coupon is paid.

Assumptions and Limitations of YTM

YTM is useful, but it rests on assumptions you should know about before relying on it.

First, it is not a promise. The BSE and NSE advisory says plainly that YTM is not a guaranteed return and can change with market rates, liquidity, time to maturity and the issuer's creditworthiness.

Second, it assumes you hold the bond to maturity. If you sell early, what you earn depends on the price you sell at, and the same advisory warns that the result can differ significantly from the YTM you saw when you bought.

Third, it assumes every coupon is reinvested at the same rate as the YTM. FINRA points out that because interest rates keep changing, this is virtually impossible in practice. Your realised return could be higher or lower as a result.

Fourth, it assumes the issuer pays everything on time. If the issuer runs into trouble, the YTM you were shown means very little.

Finally, FINRA notes that YTM ignores taxes and brokerage costs, so the return you actually take home will be lower.

YTM is not the only yield you will see quoted. The table below shows how it fits alongside the others.

The RBI defines current yield as the coupon as a percentage of the purchase price and notes that it leaves out other sources of return, such as reinvested coupons. That is why, in our example, the current yield of 8.42% falls short of the 9.30% YTM.

Yield to call matters for bonds the issuer can repay early. FINRA explains that it is worked out the same way as YTM, but using the call date and call price instead of the maturity date and face value. Yield to worst is simply the lower of YTM and YTC, and FINRA suggests checking it for every callable bond because it shows the most conservative return you could expect. FINRA also reminds investors that both YTM and YTC are estimates; the actual return is only known once the bond is sold or matures.

YTM vs Current Yield, YTC and YTW

Yield MeasureWhat It ShowsFormula / Basis
Current YieldAnnual coupon income relative to priceAnnual Coupon ÷ Current Price
Yield to Maturity (YTM)Total return if held to maturityIRR of all cash flows to maturity
Yield to Call (YTC)Return if the issuer redeems the bond on its call dateIRR of cash flows to the call date
Yield to Worst (YTW)The lowest of the possible yieldsLower of YTM and YTC

YTM in Debt Mutual Funds

If you invest in debt mutual funds, you will see a YTM figure in the fund's factsheet as well. It is worth knowing that it means something slightly different from the YTM of a single bond.

A fund's YTM is a weighted average of the YTMs of all the securities in its portfolio, so the bonds that make up a larger share of the fund have a bigger influence on the figure. It gives an indication of the return potential of the current portfolio, but it is not the return you are guaranteed to receive. It rests on the same assumptions as bond YTM: no defaults, bonds held to maturity and coupons reinvested at similar rates.

There is another catch. Fund managers buy and sell securities over time, which changes the portfolio and its weighted average YTM. So the YTM you see on the day you invest is a snapshot, not a locked-in rate. When you buy a single bond and hold it to maturity, by contrast, the cash flows are fixed from the start, provided the issuer pays as promised.

YTM and Taxes

Since YTM is a pre-tax number, you need to think about tax before comparing it with anything else. For resident individuals, the current rules are as follows.

Interest from bonds is added to your income and taxed at your slab rate. TDS of 10% (Section 393 of the Income-tax Act, 2025) generally applies to resident investors with a valid PAN once interest from a single issuer goes over ₹10,000 in a year.

Capital gains depend on whether the bond is listed. For listed bonds held for more than 12 months, long-term capital gains are taxed at 12.5%, a rate that has applied since 23 July 2024. If you hold a listed bond for 12 months or less, the gain is taxed at your slab rate. Gains on unlisted bonds and debentures are taxed at your slab rate no matter how long you hold them.

This means two bonds with the same YTM can leave you with different amounts after tax, depending on how much of the return comes from interest and how much from a capital gain. Tax rules do change, so it is sensible to confirm the current position with a tax advisor.

Common Mistakes When Reading YTM

Most of the confusion around YTM comes down to a handful of mistakes that are easy to avoid once you know about them.

Treating YTM as a guaranteed return. It is an estimate based on assumptions. As the BSE and NSE advisory points out, it can change with interest rates, liquidity and the issuer's credit standing, and FINRA notes that the actual return is only known when you sell or the bond matures.

Chasing the highest YTM on the list. A higher yield usually means the market sees more risk. Investor.gov makes clear that lower-rated bonds pay more because they carry more credit risk. Always check the rating and the issuer before you are drawn in by the number.

Mixing up YTM and current yield. Current yield ignores any gain or loss at maturity. On a bond bought at a discount or premium, the two can be noticeably different, as our example showed.

Ignoring the call feature. If a bond can be called early, YTM may overstate what you will actually earn. FINRA recommends looking at yield to worst for every callable bond.

Forgetting about tax and costs. YTM is a pre-tax, pre-cost figure. A bond with a slightly lower YTM can leave you better off after tax, depending on how its return is taxed in your hands.

Assuming you will hold to maturity when you might not. If you need the money early, think about the bond's duration and how easy it will be to sell, not just its YTM.

How to Use YTM When Choosing Bonds

A few practical habits will help you get the most out of YTM.

• Compare like with like. A AAA-rated PSU bond and a lower-rated corporate bond can have very different YTMs for good reason, so compare yields among bonds with similar ratings and maturities.

• If a YTM looks unusually high, look into it. Check the credit rating, the issuer's repayment record and any recent rating changes.

• Pick a maturity that fits your plans. YTM assumes you will hold until maturity, so choose bonds that mature around the time you need the money.

• Think in post-tax terms when you compare a bond's YTM with a fixed deposit or another investment.

• Use a regulated platform. The BSE and NSE advisory asks investors to confirm that an online bond platform is a SEBI-registered Online Bond Platform Provider (OBPP), and to check liquidity, settlement timelines and all fees.

On BondScanner, the YTM of each listed bond is shown next to its credit rating, maturity date and coupon rate, and the Bond Yield Calculator works out both current yield and YTM from the standard inputs. That makes it easier to compare bonds side by side without doing the maths yourself.

Conclusion

The coupon tells you what a bond pays. YTM estimates what you may earn if you hold to maturity . Because most bonds trade above or below face value, relying on the coupon alone can make an expensive bond look attractive and hide the value in a cheaper one.

YTM brings together the price, the coupons, the face value and the time to maturity in a single annual figure, which is why the RBI and other regulators point investors to it. Read it alongside the credit rating, the maturity and the tax treatment, and keep its assumptions in mind. Used that way, it is a useful number to look at when choosing a bond.

Published By

BondScanner, a SEBI-registered Online Bond Platform Provider (OBPP). Links to BondScanner's platform and app listings are for educational and informational discovery purposes only.

Disclaimer

This blog is intended solely for educational and informational purposes. The instruments, issuer categories, yield ranges, and examples mentioned herein are illustrative and should not be construed as investment advice or recommendations. BondScanner is a SEBI-registered OBPP and does not provide personalized investment advice. Nothing in this article is a solicitation to buy or sell any security. Fixed and coupon returns described in this article do not constitute guaranteed or assured returns. Investments in debt securities are subject to market, credit, and default risks, including delay and/or default in payment. Investors must read all offer-related documents carefully before investing.

Sustvest Broking Pvt. Ltd. | SEBI Reg. No. INZ000320834

FAQs on Yield to Maturity (YTM)